SP-O

 

Medium temperature: +10÷-5°C | Low temperature: -15÷-25°C

Medium temperature: 0,70÷2,60 kW | Low temperature: 0,60÷1,90 kW

Floor or roof mounted condensing unit

R404A | R134a | R452A

Condensator H: 357÷427 mm | L: 620÷820 mm | D: 337÷427 mm
Evaporator H: 175 mm | L: 654÷1.654 mm | D: 410 mm

 

For more details download our videocatalogue

Fill the form to ask a custom quotation

 

The models in the SP-O series are air cooled split unit. This refrigeration units are suitable for outdoor use and designed to meet the requirements of storing goods inside small-medium sized rooms.

The SP-O series consists of 2 models: MSP for average temperatures (+10° ÷ -15°, maximum room volume of 77 m³) and the BSP for low temperatures (-15° ÷ -25°, maximum room volume of 43 m³).

The power range covered varies from 0.78 kW to 3,747 kW.

The split structure allows the assembly of evaporator and condenser separately allowing the user a high degree of flexibility in the choices of installation overcoming all the problems of space that prevent the installation of the monoblock.

The condensing unit is equipped with a reciprocating hermetic compressor, covered by a strong and compact sheet steel body necessary for the protection of the machine after its positioning on the ground outside the room.

The evaporator, of a flat, capillary and ultra-thin type, is installed on the internal ceiling avoiding reductions to the room’s volume.

The 2 units are connected by the pre-charged refrigerant piping, supplied as standard, with a length of 2.5 m (up to 10 m on request).

The SP-O units are supplied ready for use: both the condensing and evaporating parts have been tested and preloaded with refrigerant, ensuring a simple and rapid mounting with the aid of specific connection joints for the pipes.

The standard equipment includes automatic electric defrosting while the kit for adapting the SP-O to the external environment is included on request, including the pressure switch for modulating the speed of the condenser fans and the preheating of the compressor which make the machine work efficiently even in difficult weather conditions.

The SP-O functions can be programmed by using a practical electronic control unit with a user interface that allows a complete set of work times, electrical defrost and condensate water drainage.

A remote control panel on the wall completes the equipment, helping to make the SP-O an efficient, resistant and highly customizable machine.

For a detailed summary of the options available for this series, please refer to the videocatalogue.