Temperature: GCU range +5÷-20°C | HCU range -15°÷-40°C
Compressor power: 0,40÷34,29 kW
Mounted on floor, ceiling or shelf
R404A | R134a | R449A
H: 625÷2.000 mm | L: 1.150÷3.320 mm | D: 500÷1.400 mm
Noise level: 30÷55 dB
The models in the CU-R series are air cooled chiller equipped with a compressor that has been specifically silenced for external residential environments and for commercial and industrial use.
The series is divided into 2 models: GCU for operating temperatures from 5° to -20° with nominal absorption from 1.11 kW to 34.29 kW and HCU for operating temperatures from -15° to -40° with nominal absorption from 1.01 kW to 23.98 kW.
The power range covered and the type of construction make the CU-R units extremely versatile elements in terms of composition of an efficient refrigeration system and suitable to meet a wide range of needs.
All models are built around a solid body structure made of sheet steel, equipped with openable doors for quick and effective access to the internal components during maintenance operations.
The particular internal configuration of the CU-R allows the noise level of the system to be reduced: soundproofed compartments house the hermetic compressor which, together with the large-area air-cooled condenser and the 6-pole axial fans with low rotation speed, allow optimal and silent performance to be achieved in operation.
The mini-channel technology condenser includes a dehydrating filter to guarantee punctual and controlled refrigerant operation.
Supplied with pressurized nitrogen, the condenser includes connection pipes with a compressor and liquid receiver is also supplied.
The receiver includes taps, an alarm light and a safety valve for adjusting and controlling the level of the inflowing and outflowing liquid.
The CU-R models are equipped with a pressostatic speed variator (in the largest units), oil pressure switches and minimum and maximum liquid pressure switches that are adjustable and have an automatic reset.
The semi-hermetic compressor mounted on the CU-R is available in various models for a covered power range from 0.4 kW to 34.29 kW.
The standard installation involves placing the CU-R units on the ground outside avoiding reductions to the room volume.
Smaller units can be housed on the ceiling or shelf according to the structural needs of the user.
The CU-R units are supplied complete with a pre-heating resistor for optimized machine functionality even in difficult climatic conditions to which the unit could be exposed.
A practical box with a terminal board installed on the body allows the electrical connection of the CU-R outside, thus avoiding problems of adaptation during installation.
The electrical panel on a hinge completes the standard equipment of an efficient, complete and customizable condensing unit.
Numerous variants are available in terms of voltage, condensation, refrigeration circuit configuration, electrical panel and type of soundproofing.
For a detailed summary of the options available for this series, please refer to the videocatalogue.