Air handling units for industrial drying.

The UAV series models are refrigeration units designed for drying cured meats, hams and cheeses with the need of temperature and relative humidity control in medium-large rooms for industrial applications.

The operation range is from +25°C to +10°C while the achievable humidity range varies from 60% to 80%.

The UAV series is offered with a capacity range of 7,2kW ÷ 87kW with a total room volume of 20m³ ÷ 250m³. All units can reproduce customized drying and ageing cycles, guaranteeing production in all seasons with any external climatic variation.

The UAV system is composed by an efficient floor standing air handling unit, made of AISI 304 stainless steel and equipped with removable panels that allow easy access to the components completely contained within the body.

The UAV refrigeration system is equipped with semi-hermetic compressor provided with integrated thermal protection and crankcase heater.

The refrigerant expansion is through thermostatic expansion valve.

The air-cooled condenser is remote, equipped with 4 or 6-pole fans and thermostatic speed variator with horizontal air flow to optimize condensing pressure.

The units are precharged with refrigerant and complete with liquid receiver, taps, safety valve, filter drier and sight glass.

A distinctive feature of the UAV range is the humidification-dehumidification system, necessary for the implementation of the drying cycles.

Regulated by an electronic controller, the humidity control is performed thanks to the water taken from the water network to which
the unit is connected and automatically introduced through spray nozzles.

The dehumidification phase precedes a heat recovery post-heating process.The temperature inside the room is regulated by electric heating with an electronic control thermostat to secure precise and efficient operations.

Fresh air intake process in the room is managed by the electronic controller which allows highly effective centralized monitoring.

After positioning the unit inside or outside the room with suitable insulation, the installer needs to connect the remote condenser.

The correct operation of the machine can always be controlled through an electronic control board placed laterally and equipped with
safety fuses.

The parameters and working times of the UAV units can be adjusted directly by using the control unit with digital display for a fast, simple and highly customizable setting by the user.